A cast is a common treatment for broken bones, but it can make everyday activities difficult. One of the most challenging things about living with a cast is keeping it dry, especially if you have to shower or swim.
How To Waterproof A Cast For Swimming
Waterproofing a cast for swimming is common, while it’s not recommended to fully submerge your cast in water, there are ways to keep it dry while enjoying a dip in the pool.
Here are a few tips on how to waterproof your cast:
Use A Sealant
You can purchase a waterproof sealant at your local drugstore or online. Simply apply the sealant to the exposed edges of your cast and allow it to dry. This will create a barrier between your skin and the water.
Wear A Plastic Bag
Covering your cast with a plastic bag is another easy way to keep it dry. Just make sure the bag is tightly sealed at the edges so water can’t get in.
Use A Waterproof Cast Cover
There are special covers designed to keep casts dry. These covers are made of waterproof material and fit snugly over the cast. You can find them online or at medical supply stores.
Following these tips, you’ll be able to enjoy swimming and other activities without worrying about damaging your cast.
Effects Of Getting A Cast Wet
When you have a cast, you need to take extra care of it to prevent any further injury. One thing you need to be careful about is getting your cast wet.
Here are some of the effects of getting a cast wet:
1. It can cause the skin around the cast to become irritated and red.
2. It can make the cast smell bad.
3. It can soften the plaster and make it weaker.
4. It can make the cast slip off more easily.
5. It can delay healing by making the skin around the injury softer and more vulnerable to infection.
So, if you have a cast, be sure to keep it dry. If it does get wet, dry it off as soon as possible with a towel or hairdryer. And if you’re going to be in the water, be sure to wear a waterproof cast cover.
How To Waterproof A Cast
Waterproofing your cast is essential to preventing skin irritation and infection. There are a few different ways to waterproof a cast, and the best method for you will depend on the type of cast you have.
Sealant
If you have a plaster cast, you can waterproof it with a sealant. There are several brands of sealant available, and your doctor or orthopedic surgeon can help you choose the right one.
Sealants are applied to the outside of the cast and dried, forming a protective barrier that keeps water out.
Spray-On Coating
If you have a fiberglass or synthetic cast, you can waterproof it with a spray-on coating. These coatings are applied to the inside of the cast and dried, creating a watertight seal.
There are several brands of spray-on coating available, and your doctor or orthopedic surgeon can help you choose the right one.
Once your cast is waterproofed, you can safely shower or bathe without fear of damaging it. Just be sure to avoid getting the cast wet until the sealant or coating has had time to dry completely.
Waterproofing An Arm Cast
There are a few different ways that you can waterproof your arm cast. You can use a special waterproof sleeve, spray on a waterproof coating, or seal the edges of the cast with tape.
Whichever method you choose, be sure to follow the instructions carefully and ask your doctor or nurse if you have any questions.
Waterproof Sleeves
Waterproof sleeves are made of a thin, flexible material that you slip over your cast.
They are available in different sizes to fit different types of casts, and you can usually find them at pharmacies or medical supply stores. To use a sleeve, simply slip it over your cast and secure it in place with the built-in Velcro straps.
Spray-On Waterproof Coatings
Spray-on waterproof coatings are also available at pharmacies and medical supply stores. These coatings come in aerosol cans, and you simply spray them onto your cast to create a waterproof barrier. Be sure to follow the instructions on the can carefully, and apply the coating in a well-ventilated area.
Petroleum Jelly
If you don’t have access to a commercial waterproofing product, you can also try using a layer of petroleum jelly or another thick moisturizer.
Simply apply a generous amount of the product to your cast, and then cover it with a plastic bag or shower cap.
The petroleum jelly will create a barrier between your skin and the water, and the plastic will help to keep the products in place.
Waterproof Covers
You can also purchase special waterproof covers for arm casts. These covers are made from a variety of materials, including latex and neoprene, and they slip over your cast to create a waterproof seal.
Waterproof covers are available in most medical supply stores, and they’re relatively inexpensive.
Whenever you’re using water – whether you’re bathing, showering, or swimming – it’s important to take precautions to prevent your cast from getting wet. Waterproofing your arm cast is a simple and effective way to keep your skin healthy and your cast dry.
Waterproofing A Leg Cast
If you have a leg cast, you’ll need to take some extra precautions to keep it dry. Waterproofing your leg cast will help protect it from moisture and keep you comfortable.
There are a few different ways to waterproof a leg cast. You can purchase a waterproof cover for your cast, or you can make your own with a garbage bag and some tape. Whichever method you choose, be sure to test it out before getting your cast wet.
Waterproof Cover
If you decide to purchase a waterproof cover for your leg cast, make sure it is specially made for leg casts. It should have a hole for the toe, and it should be big enough to go over the entire cast.
Be sure to read the instructions carefully before using the cover.
Garbage Bag
If you decide to make your own waterproof leg cast cover, you’ll need a garbage bag and some clear packing tape.
Cut the garbage bag to fit over the cast, and then secure it with the packing tape. Again, be sure to test the cover before getting your cast wet.
Whichever method you choose, be sure to test it out before getting your cast wet. That way, you can be sure that it will work and that your cast will stay dry.
Waterproof Covers For Casts
If you have a cast on your arm or leg, you know that keeping it dry is essential to the healing process. But with traditional plaster or fiberglass casts, that can be a challenge – especially if you live an active lifestyle.
That’s where waterproof covers for casts come in. These days, there are a variety of products on the market that can help you keep your cast dry, whether you’re taking a dip in the pool or just dealing with everyday moisture.
Here are a few of our favorites:
The DryPro Waterproof Cast Cover
This product is designed to fit snugly over any type of plaster or fiberglass cast, creating a barrier that keeps water out.
It comes with a built-in pump that helps to get rid of any air bubbles, and it has a comfortable fit that won’t rub or chafe your skin.
The AquaGuard Pre-Formed Waterproof Cast Cover
This product is ideal for those who want an even easier way to keep their cast dry. Simply slip it over your cast and secure it with the included Velcro straps, and you’re good to go. It’s made from a durable, latex-free material that’s both comfortable and breathable.
The CastCooler Waterproof Cast Cover
This cover not only keeps your cast dry but also helps to keep your skin cool and comfortable. It’s made from a lightweight, breathable material that wicks away moisture.
The DryPro Waterproof Cast Cover
This product is perfect for those who are looking for a little extra protection. It’s made from a heavy-duty material that’s both waterproof and airtight.
The Aqua Shield Waterproof Cast Cover
This cover is perfect for those who want to be able to swim and shower while they’re wearing a cast. It’s made from a lightweight, breathable material that’s both waterproof and airtight.
The Cast Protector Waterproof Cast Cover
This product is perfect for those who are looking for a little extra protection. It’s made from a heavy-duty material that’s both waterproof and airtight.
The Waterproof Cast Cover from Premium Care
This cover is perfect for those who want the best of both worlds. It’s made from a lightweight, breathable material that’s both waterproof and airtight.
The Waterproof Cast Cover from Guardian
This product is perfect for those who are looking for a little extra protection. It’s made from a heavy-duty material that’s both waterproof and airtight.
The Waterproof Cast Cover from Seal-Tight
This cover is perfect for those who want the best of both worlds. It’s made from a lightweight, breathable material that’s both waterproof and airtight.
The Waterproof Cast Cover from AquaGuard
This product is perfect for those who want ultimate protection. It’s made from a heavy-duty, waterproof material that’s both airtight and watertight.
Does This Cast Cover For Swimming And Baths Work?
If you have a cast on your arm or leg, you may be wondering if you can still enjoy swimming and baths. The good news is that there are special covers available that will allow you to safely get wet.
Before using a cast cover, it’s important to check with your doctor or physiotherapist first. They will be able to advise you on the best type of cover for your injury, and whether or not it’s safe for you to get wet.
Once you have the green light from your healthcare professional, there are a few things to keep in mind when using a cast cover.
First, make sure the cover is made from a waterproof material like latex or neoprene. It should also have a tight seal to prevent water from seeping in.
To use the cover, simply slip it over your cast and secure it in place. When you’re finished swimming or bathing, remove the cover and allow your cast to air dry.
With a little planning and preparation, you can still enjoy your favorite activities while wearing a cast. Just be sure to follow your healthcare professional’s instructions and take all necessary precautions.
A Waterproof Vacuum Sealed Cast Cover
If you have a cast on your arm or leg, you know that keeping it dry is essential to preventing infection and ensuring a speedy recovery.
But showering and bathing can be a challenge with a traditional plaster or fiberglass cast. That’s where a waterproof vacuum sealed cast cover comes in handy.
Waterproof vacuum sealed cast covers are made of a durable, watertight material that completely encases the cast.
This keeps the cast dry and free from dirt and debris, while still allowing air to circulate and preventing skin irritation.
Installing a waterproof vacuum sealed cast cover is quick and easy. Simply slip it over the cast and use the built-in pump to create a vacuum seal. No tape or other fasteners are needed.
When it’s time to remove the cast cover, just depress the release valve and the vacuum seal will be broken. The cast cover can then be easily peeled away.
Waterproof vacuum sealed cast covers are an essential tool for anyone with a plaster or fiberglass cast. They help keep the cast clean and dry, while still allowing air to circulate and preventing skin irritation.
What Not To Do
1. Do not use a hair dryer to try to speed up the drying process – this can actually make the cast more susceptible to moisture.
2. Do not apply any lotions, oils, or other products to the cast. These can actually trap moisture against the skin and lead to irritation.
3. Do not submerge the cast in water – this will completely negate the waterproofing.
4. Do not use any kind of heat source (including a hairdryer) to try to dry out the inside of the cast. This can damage the skin and lead to irritation.
5. Do not pick at or scratch the inside of the cast. This can damage the skin and lead to irritation.
If you follow these simple guidelines, your cast should stay waterproof and comfortable throughout the duration of your treatment.
